A car phone mount should be easy to install, secure enough for everyday driving, and compact enough that it does not take over the dashboard. The LISEN 360° Vacuum Suction MagSafe Car Mount takes a simple approach, combining a slim metal body, a manual vacuum suction base, and magnetic phone attachment.
There is no motor, battery, or wireless charging system. Instead, the mount focuses on magnetic phone mounting with adjustable positioning. An included adhesive mounting base also provides an option for dashboards where direct suction is not suitable.
Ultra-Slim Metal Design
The LISEN 360° Vacuum Suction MagSafe Car Mount has a compact metal body measuring 2.6 x 0.8 inches. LISEN lists the construction as titanium alloy, giving the mount a solid feel while keeping the overall design small.
Its low-profile design takes up little dashboard space, and the holder can be folded down when it is not needed. The adjustable joints provide resistance when positioning the mount, helping it stay at the selected angle.
Vacuum Suction System
The mount uses what LISEN describes as a six-layer nano-gel vacuum system. A twist-lock mechanism creates the vacuum seal and secures the base to a suitable mounting surface.
LISEN claims the system can provide up to 98 lbs (44.5 kg) of holding force and says it offers twice the stability of its previous design. These are manufacturer claims and should not be treated as the practical weight capacity of the phone mount.
The suction surface is washable and reusable. LISEN says it can be rinsed with water when its grip becomes weaker. The company also lists a temperature range of -40°F to 194°F (-40°C to 90°C) for the suction system.
The mounting surface is important because the vacuum base needs a good seal. A flat, smooth surface provides the best conditions for installation, while sloped, curved, or textured areas may reduce contact.
360-Degree Adjustment and Magnetic Attachment
The mount provides 360-degree adjustment, giving you flexibility to position the phone at different viewing angles. It can be used in either portrait or landscape orientation, which is useful for navigation.
For compatible phones, the magnetic attachment eliminates the need for a traditional clamp. LISEN says the mount works directly with MagSafe-compatible iPhones and magnetic cases.
The mount also works with Android smartphones. I tested it with the Samsung Galaxy S24 and HONOR 400+, and both attached securely to the magnetic mount without needing the included magnetic ring.
This means Android users, including those using Samsung Galaxy S series smartphones, can also use the mount when the phone or case provides compatible magnetic attachment. For phones or cases without magnetic compatibility, the included magnetic ring can be used instead.
The mount itself does not provide wireless charging. If you want to charge your phone while driving, you will need a separate charging cable.
What’s Inside the Box?
- 1 × Ultra-Slim Phone Holder
- 1 × Adhesive Mounting Base
- 1 × Magnetic Ring for Non-MagSafe Cases
- 1 × Protective Sticker
The adhesive mounting base provides an alternative for dashboards that are not suitable for direct suction, while the magnetic ring allows phones or cases without built-in magnetic compatibility to attach to the mount.
Installation
Installation is straightforward. Before installing the mount, clean the selected area and remove dust, dirt, oil, and other residue. The surface should be completely dry before installation.
The mount can be installed directly on a suitable smooth surface. If the dashboard is textured, curved, or otherwise unsuitable for the vacuum base, the included adhesive mounting base can be used to provide a smoother surface.
After positioning the adhesive base, press it firmly against the dashboard. LISEN recommends allowing the adhesive base to set for 12 hours before installing the mount.
Once the 12-hour curing period is complete, unfold the mount and secure it using the vacuum locking mechanism. You can then adjust the holder to the preferred position.
Following the recommended installation process is important because the quality of the mounting surface affects how well the vacuum system can work.
Everyday Use
The LISEN 360° Vacuum Suction MagSafe Car Mount is designed to keep the phone within easy view without adding much bulk to the dashboard. Once installed, the magnetic attachment makes it simple to put a compatible phone on the mount and remove it when needed.
The adjustable design also makes it easy to change the phone’s viewing position depending on where the mount is installed. This is useful when positioning the screen for navigation or adjusting it for a more comfortable viewing angle.
When the mount is not being used, the holder can be folded down. This helps keep the dashboard less cluttered and makes the mount less noticeable when there is no phone attached.
Phone Holding While Driving
The combination of the vacuum base and magnetic attachment is designed to keep the phone positioned on the dashboard while driving. Once mounted, the phone can be positioned for navigation and other hands-free uses.
The mount can also be used to hold a smartphone for dashcam recording. This can be useful for drivers who use their phone as a dashcam, provided the phone is positioned safely without obstructing the driver’s view or interfering with vehicle controls.
When the phone is removed, the holder can be folded down against the dashboard, reducing the space it occupies when not in use.
What We Like
Compact design: The 2.6 x 0.8-inch body takes up little dashboard space and can be folded down when not needed.
Magnetic attachment: Compatible phones can be attached and removed without opening a clamp.
Vacuum mounting: The twist-lock mechanism secures the base without requiring a motor, battery, or power connection.
Flexible positioning: The 360-degree adjustment makes it easy to position the phone for navigation and other uses.
Things to Consider
The mounting surface is the biggest consideration. The vacuum system works best on a flat and smooth surface. Textured or heavily curved dashboards may require the included adhesive mounting base.
The adhesive base requires 12 hours to set before use, according to LISEN.
Another limitation is the lack of wireless charging. If you need to charge your phone while driving, you will need to use a separate cable.
The LISEN 360° Vacuum Suction MagSafe Car Mount is available on Amazon for US$26.99, or approximately ₱1,681 based on the current exchange rate. The peso equivalent may vary depending on the exchange rate, payment method, and applicable fees.
LISEN also lists a 2-year warranty for the mount, although warranty coverage and terms may depend on where the product is purchased.
Final Thoughts
The LISEN 360° Vacuum Suction MagSafe Car Mount is a good option if you want a compact phone mount without the bulk of a traditional holder. It worked well with the Samsung Galaxy S24 and HONOR 400+ in my testing, making it a practical choice for phones with built-in magnetic support or compatible magnetic cases.
The main limitation is the mounting surface, while the lack of wireless charging may also matter to some users. If you want a small, adjustable magnetic mount that stays out of the way, the LISEN 360° Vacuum Suction MagSafe Car Mount is worth considering.
No comments:
Post a Comment